HEZE-1 is a street lighting controller that connects to the street lighting via a Zhaga (ZD4i) socket. It communicates wirelessly using GSM (LTE) modules, enabling data collection and device configuration (including street lighting control) through the LUMISYS application. The controller is equipped with additional features such as a GPS module, a built-in astronomical clock, a dusk sensor, and an accelerometer for detecting pole damage.
|
Regulatory |
Standards |
CE/RED/ETSI |
|
|
|
Certifications |
Zhaga/ZD4i/TALQ |
|
|
Communication |
GSM |
LTE Cat 1 bis, Pasma częst. (Mhz) LTE-FDD: 1/3/7/8/20 |
|
|
|
Security |
TLS (AES 128-bit) |
|
|
|
ISM (frequency) |
LoRa 868 Mhz |
|
|
|
ISM (power) |
max 25 mW |
|
|
|
Antenna (GSM) |
Internal |
|
|
|
Antenna (ISM) |
Internal |
|
|
Mounting |
|
Zhaga Book 18 |
|
|
Electrical parameters |
Power supply |
24 VDC |
|
|
|
Power consumption |
< 0.5 W (standby) |
|
|
|
Safety |
Short-circuit protection |
|
|
|
Protection class |
Class I or II |
|
|
Interface |
|
DALI 2 |
|
|
Casing |
Dimensions |
Height: 32.5 mm; Diameter: 81 mm |
|
|
|
Ingress protection |
IP66 |
|
|
|
IK |
IK09 |
|
|
|
Operation temperature |
-40 C : +65 C |
|
|
|
Relative humidity range |
5-95% non-condensing |
|
|
|
Ventilation hole |
Optional |
|
|
|
Marking |
Laser engraving or label |
|
|
|
QR code |
YES |
|
|
Location |
GNSS |
GPS/GLONASS/Galileo/QZSS |
|
|
|
Accuracy |
1.5 m CEP |
|
|
Functionalities |
Dimming range |
1 – 100% (if power supply allows) |
|
|
|
Max lamp power |
500W |
|
|
|
Power measurement |
YES (if power supply allows) |
|
|
|
Update |
Firmware update (OTA) |
|
|
|
Last Gasp |
YES |
|
Alarms monitored |
|
Power Outage |
|
|
|
Luminaire Tilt |
|
|
|
Luminaire Movement |
|
|
|
New Luminaire |
|
|
|
Maximum Power Exceeded |
|
|
|
Low Power Drop |
|
|
|
Maximum Temperature Exceeded |
|
Measured parameters |
Energy |
Active Energy [kWh] |
|
|
|
|
Active Energy T1 [kWh] |
|
|
|
|
Active Energy T2 [kWh] |
|
|
|
|
Reactive Energy [kVarh] |
|
|
|
|
Reactive Energy T1 [kVarh] |
|
|
|
|
Reactive Energy T2 [kVarh] |
|
|
|
|
|
|
|
|
Measurements |
Active Power [W] |
|
|
|
|
Current [A] |
|
|
|
|
Voltage [V] |
|
|
|
|
Reactive Power [Var] |
|
|
|
|
Apparent Power [VA] |
|
|
|
|
Power Factor |
|
|
|
|
Total Operating Time |
|
|
|
|
LED Temp [℃] |
|
|
|
|
Power Supply Temperature [℃] |
|
|
|
|
Internal Temperature [℃] |
|
|
|
|
Power on Counter |
|
|
|
|
Light Source Start Counter |
|
